Reducing Boiler Operating Pressure


The Lord Ezra Award


What is going on inside a Steam and Condensate System?


I-GAS a new qualification for maintenance & gas fitters


Reducing boiler pressure saves energy – myth or fact?


A new guide to water treatment for Industrial Boiler plant (BG04)


C&D Foods saves over £50,000 and more than halves carbon emissions with LPG switch


LNG from Calor powers Cochran’s new R&D centre


IHEEM WALES 2016 Regional Conference and Exhibition


CEA Launches I-GAS


BG04 in BS5410-2 Code of Practice for liquid fuel firing Part 2

BS5410-2 Code of Practice for liquid fuel firing Part 2:

Installations providing space heating, hot water and steam supply services to non-domestic buildings and para Water treatment for industrial boilers contains the following statement:

“Feed water for steam boilers should be pre-treated to ensure that it meets the quality limits set by the boiler manufacturer. In order to protect the boiler, the quality of the boiler feed water should be subject to continuous monitoring and control to ensure it remains within the limits specified by the boiler manufacturer. Advice should be obtained from a water treatment specialist which should be followed at all times.


Industrial boiler water treatments should follow ICOM Energy Association/CEA guide to Water treatment for industrial boiler plant.” BG04.


To attend the BG04 - Steam Boiler Water Treatment Training Course please see details here

To purchase your hardcopy of BG04 or BG03 please contact CEA on 01740 625538 or for more information please click here


Reducing Boiler Operating Pressure

What Are the Implications of De-rating Boiler Pressure Below that of Boiler Design Pressure

Is it appropriate on your plant to reduce the boiler operating pressure with a view to saving money on fuel costs, when you consider both the effects on the plant and equipment and the associated risks of making the necessary changes?

In these days of pushing the boundaries on energy efficiency it’s very easy to connect a lower working temperature in a boiler to a lower flue gas temperature and therefore higher efficiency; but is that really the case?  While it’s true that a 15°C reduction in flue gas temperature will save most steam users 1% of the boiler running cost, it isn’t quite that simple when it comes to looking at the effect on the system as whole.

Click here to read the article.

Adrian Rhodes - CEA Vice Chairman


The Lord Ezra Award

About Lord Derek Ezra, MBE 

The Lord Derek Ezra had been associated with energy and combustion for over 60 years. For more than 20 years, The Combustion Engineering Association (CEA) were privileged to work with Lord Ezra, first as President of the CEA and latterly as Patron of the Association.

In mid-2015 he expressed his pleasure at hearing of the activity and progress within CEA and wished us all well for the future, sadly he passed away on the 22nd December 2015 at age 96.

 Lord Ezra was an Honorary Fellow of Magdalene College, Cambridge, and Liberal Democrat Life Peer having joined the Liberals in 1936. He worked in the UK coal industry for 35 years, the last 11 years as Chairman of the National Coal Board. During that time he was instrumental in the early forming of today's European Union.

Lord Ezra was the Liberal Democrat’s spokesperson for Economic Affairs, Trade & Industry (Energy) (1998-2005) and latterly spokesperson on Energy Matters and had been Honorary President of the Coalfield Communities Group since 2006.

In recent political times, Lord Ezra had concentrated on the environmental impacts of energy/clean coal technology and the problem of fuel poverty. More recently Lord Ezra had formed a private company promoting small-scale electricity generation.

The Lord Ezra Award 

Lord Ezra was very keen that CEA should continue to support the industry through education and training. He wanted to add his own personal support and commitment to that end by offering a prize to encourage new entrants to the industry and new innovation where possible. Thus, in 1995, the Lord Ezra Award was initiated and presented each year.

The Combustion Engineering Association, on behalf of Lord Ezra, is proud to present the award and invites entries from a person or group of persons in combustion engineering who have created or facilitated a benefit to that industry, especially through a new, innovative or novel idea.

The award is open to a large field and entrants who are asked to submit competitively based schemes in order to qualify and actually win. The winning entrant or entrants receive the award in October at the House of Lords, and the award presentation will follow the CEA David Gunn Memorial Lecture 20th October 2016. 

The competition is open to all Members of the CEA at any level within a Member company or organisation submitting an entry/s that meet the terms of reference

To submit an entry for this award please click here   



What is going on inside a Steam and Condensate System?


Nowadays, knowledge is the most important non-material asset of an enterprise. The quality and speed of which knowledge is transmitted contribute considerably to determining success and failure. With this in mind, Flowserve has created the GESTRA Academy to actively support companies by providing personalized consulting, training programs, comprehensive technical literature and project management.

They have developed movies to allow people to explore and get to grips with the inner workings of processes that you can never see in real life!

Watch GESTRA’s various exciting movies – all shot in Bremen at the world's only full scale glass model – to find out more about what is actually going on inside a steam and condensate system Here


This video demonstrates the thermal dearation of feedwater for steam boilers. To explain the process of dearation, with the glass model.


This video shows the thermal processes taking place during the generation of saturated steam in a glass steam boiler. This is demonstrated with the aid of the glass evaporator.


Steam Trap UNA16: This video looks at condensate discharge using the ball float trap, type UNA 16, as demonstrated in the glass steam system.


Steam Trap MK45: This video looks at condensate discharge by means of the thermostatic steam trap with membrane regulator, type MK 45, as demonstrated in the glass steam system.


In this film clip, the origin and effect of thermal pressure pulses, generally known as waterhammer, will be demonstrated.


I-GAS a new qualification for maintenance & gas fitters


Plant & Works Magazine have recently published an article about the introduction to the CEA's new I-GAS Course.

The CEA’s Industrial Gas Operations Accreditation Scheme (I-GAS) qualification has been devised to fill this gap, in collaboration with industrial gas training providers, manufacturers of combustion equipment, and employers.  It is the only formal training and accreditation scheme currently available that is specifically designed for maintenance staff and technicians working with gas in industrial premises.


To see the article please click here




Reducing boiler pressure saves energy – myth or fact?


Environmental sustainability has never been so important and this pressure is leading many plant engineers to explore ways they can reduce boiler house energy consumption. A common idea is to reduce boiler pressure to save energy, but does it work? Chris Coleman, Marketing Product Manager at Spirax Sarco, explains how steam system pressure and fuel economy are interlinked. 

The pressure for companies to reduce their environmental impact is growing daily. Consumers, investors, governmental bodies, the media and many other groups are all increasingly focused on the need to lower emissions. This is leading many boiler operators to review their boiler house energy consumption with a view to reducing total carbon emissions and saving energy costs. 

One question we’re often asked is whether it’s a good idea to run a steam boiler at lower than its design pressure to save energy.

The answer is not always a simple yes or no; there may be bigger issues to consider other than relatively minor adjustments to boiler pressure. In particular, it’s vital to ensure that all condensate and flash steam is recovered and its heat re-used efficiently.

Ultimately, what really counts is ensuring that the steam distribution system is as energy efficient as possible.

Higher distribution pressure is more efficient

Generating steam at a higher pressure will require more fuel. However, at its simplest level, the same amount of energy is used whether the boiler raises steam at 4 bar g or 10 bar g. This is because it’s the connected load and not the boiler output that determines the overall energy consumption of a building or industrial plant.

We have to also consider losses around the system. Within the boiler itself these losses depend on the boiler’s combustion efficiency, the heat transfer efficiency of its combustion chamber and fire tubes, and flue losses, which are likely to be higher at higher boiler pressures. However, these rises are marginal when compared to the benefits of distributing steam at a higher pressure.

The most efficient way to run steam plant is to operate the boiler at higher pressures, with pressure reducing equipment to lower the system pressure at the point of use. Using higher pressures increases the boiler’s thermal storage capacity, helping it to cope more efficiently with fluctuating loads and minimising the risk of wet and dirty steam being carried over into the distribution system. It also cuts the cost of materials, insulation and labour, since smaller bore steam mains can be used.

Consider all losses

There will also be losses from the steam distribution system, including heat loss from pipework and fittings to the surrounding atmosphere, as well as steam leaks. Again, all of these losses will be greater at higher distribution pressures.

Potentially though, the most significant losses occur after the steam-using process, whether space heating for a building, or process heating in an industrial plant. Once the steam gives up the amount of heat that the process demands, condensate is released. In most cases, flash steam is also produced.

Now it gets interesting. If the condensate system is effective in recovering all or most of the heat in the condensate, and the flash steam is used by another process or fed to a recovery system, then losses will be minimal. In this case, the boiler operating pressure will not have much impact on the overall losses, and any efficiency gains may be offset by other considerations, such as the risk of wet and dirty steam being carried into the process.

On the other hand, if the hot condensate is not recovered effectively, or the flash steam escapes, then the losses will be large. In this case a lower operating pressure will produce lower losses. However, this would be an inefficient steam system and, rather than adjusting the boiler pressure, much greater savings could be made by improving the plant’s energy performance.

Achieving optimum steam distribution pressure

The optimum pressure within a system varies from plant to plant and depends on the maximum safe working pressure of the boiler as well as the minimum pressure required by steam-using equipment around the site.

Deciding on the optimum initial distribution pressure can be complex, taking in to consideration the application, equipment and safety issues. Allowances must also be made for steam pressure loss as the steam passes through the pipework to ensure the minimum pressure is met at the point of use. So it’s important that the pressure is not altered in a misguided attempt to reduce fuel consumption.

There are other considerations too, such as whether the existing control valves and heat exchangers are adequately sized if the pressure is dropped.

It can take a degree of expertise and experience to successfully balance conflicting factors and arrive at the optimum pressure for a steam system. That’s why many boiler operators would be better off getting advice from a steam system specialist.

Other ways to reduce fuel consumption

There are many effective ways to save fuel. It is estimated that industries could save up to 30% of the fuel feeding its boilers by combining established good practice with improved technologies.

Recover all condensate

Condensate can contain up to 20% of the energy in the steam from which it came. Returning water to the boiler feedtank typically recovers about half this energy, while the rest can be recovered by installing a flash steam vessel or pressurised condensate return system.

The benefits of condensate recovery do not end with energy savings, though. It also saves water and treatment chemical costs, and even effluent charges may be reduced because less water is discharged to drain.

Install automatic boiler blowdown

All boilers need to be periodically purged by blowdown, the key to which is removing only enough water to maintain contamination at an acceptable level. Dumping any more than this is a waste of energy and treated water.

Many boiler houses use blowdown valves that are manually opened at regular intervals and dump water down the drain. An automatic TDS (Total Dissolved Solids) blowdown controller is a better option. By continuously monitoring TDS build-up in the boiler, the controller opens the blowdown valve only as required. It is often cost effective to recover the heat from the necessary boiler blowdown using a simple flash vessel and heat exchanger system.

Creating the right boiler feedtank conditions will also reduce the amount of fuel needed to produce steam from hot feedwater. Using returned condensate, for example, to raise the feedwater temperature by 6°C gives a fuel saving of 1%. Ideally, feedwater should be maintained at 90°C.

Taking the next step

These are just a few of the factors that can determine whether a steam system operator is paying over the odds by running their plant below its optimum efficiency. A full energy audit can identify where energy is being wasted and suggest ways to win significant savings, however we know that some companies don’t have the necessary steam system expertise in-house. Therefore calling in an external provider like Spirax Sarco is often the best option. You can get in touch on


A new guide to water treatment for Industrial Boiler plant (BG04)


The ICOM Energy Association and the Combustion Engineering Association (CEA) have joined forces to produce a new Industrial Water Treatment Guide, an easy-to-follow guide to water treatment for steam and hot water boiler systems. As such, it is designed for use by non-specialists through the use of straightforward, everyday language.

Designated ‘BG04’, the new Guide was launched at the CEA’s conference in July to an audience of primarily plant managers and engineers. It was well-received and acknowledged as providing an invaluable insight into the responsibilities of managing commercial and industrial boiler plant.

Industrial Water Treatment Guide BG04 will now become an integral component of the training courses run by the CEA for operators and managers of industrial and commercial boiler plant.

ICOM Director Ross Anderson noted: “Correct water treatment is essential in ensuring the reliable and efficient operation of steam and hot water boilers but until now there has been no definitive guide for commercial and industrial boilers. BG04 fills this gap in documented best practice and will play a key role in preventing corrosion and scaling.”

CEA Director David Kilpatrick added: “We recognise that many of the people responsible for the day-to-day management of such plant are not chemists or water treatment specialists. BG04 has therefore been written as a simple guide to setting up and treating these systems to ensure long, reliable life.”

The guide has been written for the layperson who does not have 'O' level chemistry but who is responsible on site for boilers and boiler water treatment, either directly or subcontracting it to a third party.

CEA hosted a very successful seminar at the Cambridge Belfry on Thursday 14th July 2016 explaining: 

  • Boiler Water Treatment (BG04) launched. 
  • Industrial Gas Accreditation Scheme (I-GAS) launched. 
  • Medium Combustion Plant Directive (MCPD) updates.  

Ideally we would like you to attend the next seminars where a hard copy will be included as part of the delegate pack, dates and locations for these seminars are currently being confirmed for the remainder of 2016 (3 are being arranged). However, if you wish to purchase your copy of BG04 for £75.00 plus £2 p&p please contact the CEA office on 01740 625538 or email




About This Guide

This comprehensive guide deals with all aspects of water treatment for steam boilers, steam generators and hot water boilers. This document applies to industrial and commercial steam and hot water boiler plant including steam generators, operating at a working pressure of between 0.5 and 60bar gauge (except where stated)  and a working temperature between 110oc and 400oc. We trust that by studying the contents and following the freely given advice your boiler plant will operate safely and more efficiently, and provide you with a trouble-free system.

Having considered who is responsible for looking after steam boilers, steam generators and hot water boilers and also who is responsible for managing the safe operation of this type of equipment, the Combustion Engineering Association (CEA) and ICOM Energy Association agreed to write this guide, with the help of our respective Members.

It is aimed as a document that can be read and understood by boiler operators, engineers and personnel with limited or no knowledge of water treatment chemistry. It is also intended to help them understand what effect any water and its subsequent treatment will have on their boiler plant.



C&D Foods saves over £50,000 and more than halves carbon emissions with LPG switch

18th July 2016

A premium dry pet food manufacturer has saved in excess of £50,000 and more than halved its CO2 emissions since converting its boiler fuel from oil to liquefied petroleum gas (LPG) from Calor.

A strong partnership

C&D Foods’ site in Larkshall, Norfolk, produces approximately 20,000 tonnes of dry pet food every year, requiring a significant amount of fuel to power its manufacturing processes. Situated off the mains gas grid, the company has partnered with Calor for the last 20 years, using LPG to fuel a collection of large on-site industrial dryers that reduce the moisture content of the dry pet food once it has been extruded.

Having established a strong relationship as C&D Foods’ fuel partner of choice, Calor then approached the business in the summer of 2014 with a plan to dramatically improve its existing oil boiler efficiency and lower its carbon output.

Working with Calor

Ian Harridge, General Manager at C&D Foods, explains: “Calor removed the existing large oil tanks and installed six 4,000 litre LPG tanks, as well as a vaporiser that can give us extra power when needed. Calor then supplied and installed a packaged gas burner to allow us to modify the boiler from its original oil burner.”

The ability to install a packaged gas burner meant the entire boiler system did not have to be replaced, which would have incurred substantial costs.

“We chose Calor based on two reasons,” Ian continues. “First, they’re the market leader, with the best coverage for off-mains sites. Second, the proposal that they put forward to assist with the installation of the new equipment was excellent, minimising any downtime or additional costs. Calor worked around times when the plant did not need to run, which included some weekend work. The installation went through with no real interruption to the business.”

The key benefits of LPG

LPG’s reduced CO2 impact compared to oil was a critical reason behind the site’s decision to fully embrace gas for its processes, as the site continues to work towards the Carbon Trust Standard. LPG is currently the lowest off-mains carbon emitting fuel available on the market, emitting 20 per cent less CO2 per kWh than oil.1 Since switching to LPG, C&D Foods has reduced its CO2 emissions by 52 per cent.

The reduced overhead costs and improved operational efficiencies achieved with LPG was also a key driver for C&D Foods, resulting in financial savings of more than £50,000.

Each LPG tank is also fitted with Calor’s intelligent automatic top-up technology, alerting the supplier when a tank is low on fuel. This ensures C&D Foods has a constant supply of fuel, guaranteeing a tank never runs short.

First class service

“The service provided by Calor has been second-to-none,” adds Ian. “They managed the whole project for us, from fitting the new foundations for the new equipment to connecting the boiler and commissioning.

“Based on the experiences we’ve had, I would have no hesitation in recommending Calor to other businesses.”


– Ends –


1 LPG’s Carbon Footprint Relative to Other Fuels – A Scientific Review, page 6


For further press information please contact:

James Montgomery, Richard Jansen-Parkes

or Jane Woods                                                                      

Edson Evers Public Relations  

120 Newport Road                   

Stafford, ST16 1BY                   

01785 255146

About Calor Gas

Calor is the UK’s leading supplier of liquefied petroleum gas (LPG), bringing clean, efficient and modern energy to rural Britain. The company provides gas to some of the two million homes and 350,000 commercial premises located off the mains gas grid, distributed via the UK's largest LPG delivery fleet.

Calor has continued to invest in its offering to ensure it provides the best service for its customers, including supply of LPG to homes and businesses and a wide range of products and appliances from boiler installations to portable heaters.

Please visit or call 0800 121 7827 for more information.


LNG from Calor powers Cochran’s new R&D centre

A leading manufacturer of industrial steam and hot water boilers is switching to liquefied natural gas (LNG) from Calor, reducing its CO2 output by 169 tonnes. LNG will power the next stage of the company’s development as it creates a new research and development (R&D) centre.

Located off the mains gas grid next to the River Annan in Newbie, Scotland, LNG will fuel a new on-site R&D centre for boiler manufacturer Cochran, helping to train more than 500 employees and commercial customers every year. LNG will also provide space heating for the company’s factory during the colder winter months.

Previously fuelled by oil, LNG’s green credentials are a key driver for the switch, reducing the site’s CO2 emissions by 28 per cent.

David Branch, Business Development Manager at Cochran, explains: “We have been looking to make the switch for a long time. The majority of boilers we manufacture are fuelled by gas and, coupled with the environmental benefits and reduced costs when compared to oil, it made commercial sense for us to introduce LNG as our fuel partner of choice.

“LNG will be used in our new R&D centre, powering the boilers we test as we facilitate product development. In addition, it will enable us to deliver vital training to our employees and customers, including the Combustion Engineering Association’s BOAS (Boiler Operation Accreditation Scheme) and I-GAS (Industrial Gas Operations Accreditation Scheme) programmes.

“Furthermore, we anticipate savings of between £10,000 to £12,000 a year. We have been delighted with the service offered from Calor so far and the proposal they put forward to fuel our site with LNG. We look forward to working together in future.”

Kevin Houlden, Business Development Manager at Calor, adds: “LNG offers an environmentally superior and cost-efficient alternative to oil. We will be supplying a 20,000-litre LNG unit, supported by a number of vaporisers that can offer extra power when demand increases.

“A highly efficient fuel, LNG achieves a greater calorific value than even propane gas, offering an impressive output of 15.2 kWh per kg.Depending on the application, LNG emits up to a third less carbon dioxide than diesel or oil based products, with Cochran predicted to reduce its CO2 emissions by 28 per cent.”

It is expected that Cochran will have fully converted to LNG by September, with the installation assisted by Calor’s sister company, PrimaLNG.


– Ends –


For further press information please contact:


James Montgomery, Richard Jansen-Parkes

or Jane Woods                                                                      

Edson Evers Public Relations  

120 Newport Road                   

Stafford, ST16 1BY                   

01785 255146


About Calor Gas

Calor is the UK’s leading supplier of liquefied petroleum gas (LPG), bringing clean, efficient and modern energy to rural Britain. The company provides gas to some of the two million homes and 350,000 commercial premises located off the mains gas grid, distributed via the UK's largest LPG delivery fleet.

Calor has continued to invest in its offering to ensure it provides the best service for its customers, including supply of LPG to homes and businesses and a wide range of products and appliances from boiler installations to portable heaters.

Please visit or call 0800 121 7827 for more information.


IHEEM WALES 2016 Regional Conference and Exhibition

New to the IHEEM events calendar this summer

This one-day Regional Conference and Exhibition is being held at the Village Hotel Cardiff on Thursday 8 September and will be open to delegates from both the public and private sector.

The conference raises the question: ‘How Safe Is My Hospital?’ - challenging attendees to look at their hospital with renewed vigour.

Every day healthcare estates are under attack in one form or another from both internal and external sources affecting patient safety and the patient environment. Is your hospital safe from government and public scrutiny? Do you keep up to date with legislation as it continues to be revised and are able to demonstrate compliance? How safe is your water supply? In addition to this, the threats to hospital security systems is rising. With information being an essential asset within the hospitals, sensitive or critically important data can be lost in a number of ways - including system failure, data theft, inappropriate usage, unauthorised access and cyber-attacks using computer viruses.

In response to these questions, a plethora of expert speakers from across the healthcare estates sector will be leading discussions on key themes: Water Safety, Governance and Compliance, Hospital Resilience and Hospital Security of IT Systems.

Confirmed speakers include:

  • Mike Simmons - Consultant Microbiologist, Public Health Wales  

  • Phil Ashcroft - Principal Buildings & Facilities Management Services Engineer, Department of Health  

  • Dr Jimmy Walker - Scientific Leader for Water and Decontamination Biosafety, Air and Water Microbiology Group      

  • Chris Northey - Associate Director, Chapman BDSP and IHEEM President

  • Geoff Walsh - Assistant Director of Planning, Capital, Estates and Operational Services, Cardiff and Vale University Health Board

  • Greg Markham - Technical Director, EMCOR UK and IHEEM Past President 

  • Eugene Conroy - Managing Director, ETA Projects LTD 

  • Graham Marsh - Governance and Compliance Technical Platform Chair and Chair of the South West Branch, IHEEM

  • Julian Amey - Chief Executive, IHEEM


Download the full Conference programme


IHEEM WALES 2016 is a joint venture between IHEEM and the IHEEM Wales Branch who have been working closely to produce an innovative event, that shares best practice and technical knowledge.

This regional event will feature a variety of expert speakers from across the UK presenting sessions that will have a universal appeal for attendees from across the UK.


CEA Launches I-GAS

The Combustion Engineering Association launches “I-GAS”

a new qualification for maintenance and gas fitters working in industry


  • Do you or any of your team work on industrial gas systems? Have you been formally trained and can you prove competence?
  • Do you or your team organise or carry out any maintenance or installation work on industrial gas systems?
  • Do you employ contractors to do this work?
  • Do you check contractor’s qualifications and competency?

There are many activities routinely occurring in industrial premises that might require breaking into a gasway for maintenance or repairs. Currently, available training and certification for gas fitters and engineers working on domestic and commercial appliances is not often appropriate for the types of gas equipment commonly found in industry, increasingly including premises where electricity is generated using gas.

Large numbers of maintenance technicians, gas operatives and contractors working in factories may have no formal training in the safe use of gas in industry.  Gas is widely used in bakeries and other food processes, breweries, laundries, metals processing, energy centres, chemical works, hospitals, pharmaceutical, and lots of other manufacturing across a wide range of industrial users and sites.  Most people know of GasSafe qualifications, and that it is a legal requirement in domestic situations to have the appropriate GasSafe accreditation for the appliance being worked on.  However, these qualifications are not required in factories and the associated training will not be relevant for the types of equipment and sizes of plant involved, the only requirement is to be able to prove competence.

Regulation 3 of the ‘Gas Safety (Installation and Use) Regulations 1998’ (GSIUR) says:

 “Gas work for those working at premises that fall outside the scope of the Regulations should only be undertaken by a person who has successfully completed an appropriate full training course followed by assessment of competence”.

The CEA’s Industrial Gas Operations Accreditation Scheme (I-GAS) qualification has therefore been devised to fill this gap, in collaboration with industrial gas training providers, manufacturers of combustion equipment, and employers.  It is the only formal training and accreditation scheme currently available that is specifically designed for maintenance staff and technicians working with gas in industrial premises.

 4.jpg  3.jpg  2.jpg

Candidates for I-GAS qualifications are expected to already be working as mechanical fitters or installers, maintenance technicians or in other associated industrial activities where they are working around gas fired systems and equipment.  They may already have domestic gas qualifications and need to enhance these with an industrial gas qualification, or they may have no formal gas training at all.

Whilst everything is done correctly by suitably qualified and experienced personnel, then all is well - but: Below - the devastation caused by an untrained operative adjusting the gas valve to the boiler.

The first boiler exploded in 2013 - Its sister boiler exploded in 2014, all because the operator and the company had not learnt its lesson from the first explosion.

No Formal training and no company procedures were in place either before or after the first explosion.

5.jpg               6.jpg 

2013 (NB. The sister boiler in the background)| 2014 (both boilers now lay in ruins)    

In order to prepare candidates for I-GAS accreditation a number of independent and competing organisations offer suitable training courses approved by the CEA. 

These courses are intended to supplement and confirm existing knowledge and prepare suitable candidates for the various levels of qualification afforded by I-GAS.  All courses are a mix of practical assessments and written examinations assessed by independent gas Assessors.

I-GAS Accreditation of itself is not a legal requirement, but it is a test of a person’s competence in relation to their current knowledge and experience at the time their assessment is completed.  It is only one possible component that may help an organisation to demonstrate their corporate responsibility to provide suitable training for employees under the Health and Safety at Work Act.

I-GAS is not a substitute for GasSafe qualifications which are still needed for work on gas installations in a wide variety of domestic and commercial premises and other publicly accessible locations such as hospitals.

The CEA is the independent Certification Body responsible for the scope, syllabus and administration of the scheme, and the selection and appointment of Training Providers and Assessors.

There are five levels that can be achieved under the I-GAS accreditation scheme and suitably skilled entrants can join at the appropriate level in line with their knowledge and skills, these are:-

  • Level 1 - Entry portfolio

New entrants, possibly with limited gas experience.

Off line course and home study to familiarise candidates with gas industry standards, legislation and procedures.  Not accredited to work on gas systems.

  • Level 2 - Industrial Gas Maintenance

Safe procedures for gas work, breaking into gas ways, repairing or replacing gas line components ‘like-for-like’, strength testing, tightness testing, purging & relighting end of line equipment.  Knowledgeable to supervise gas contractors.

  • Level 3 - Industrial Gas Technician

Work on gas pipework; understand combustion principles and combustion equipment.  Combustion analysis and emissions.  Setting regulators.

  • Level 4 - Industrial Gas Engineer

Pipework design, strength testing, Pipeline replacement and modifications to installations (incl. “component change” procedures), and gas system commissioning.

  • Level 5 - Industrial Gas Designer

New installation design and certification. DSEAR and risk assessments. Gas installation projects.

  • The first public I-GAS level 2 course is week commencing 22 August 2016 at Blue Flame, Newcastle Under Lyme.
  • The first public I-GAS level 3 is week commencing 24 October 2016 also at Blue Flame.

Contact details for further information:

David Kilpatrick – Director:  The Combustion Engineering Association

NET Park, Thomas Wright Way, Sedgefield, Co. Durham, TS21 3FD

Tel: 01740 625538 - Fax: 01740 625251 - Mobile: 07866 764716 - Email:


Request for Membership Details

Membership is available in several categories. Please fill in the form below and full details of membership and costs will be forwarded to you.