Similar Posts
Bringing a Steam Boiler On-Line from Cold
To help understand what needs to be done and why things need to be done in a certain way, the following procedure presumes that the boiler is completely cold and dry, such as after a prolonged shutdown or annual inspection. Steps can be omitted for boilers with some residual heat still in them and a…
Do you use gas fired equipment in your factory or on your site?
“I-GAS” A qualification for maintenance personnel and gas fitters working in industry to demonstrate competence. Many people in industry are under the impression that the Gas Safety (Installation and Use) Regulations 1998 do not apply to them or their employees within their factory premises. Unfortunately, this assumption is wrong and there is a clear requirement…
Videos – Picking the Right Size of Steam Boiler / Planning for a Hire Boiler
Adrian Rhodes director of Coal Hill associates, also CEA Immediate Past Chairman, has been creating and posting informative videos related to our industry. Watch the two videos below or subscribe to his channel for updates when further videos are uploaded.
Steam Boiler Water Treatment & Testing course
Steam Boiler Water Treatment & Testing course Delivered on behalf of CEA by Deep Water Blue Ltd Three dates and locations planned for 2023;
MCP and SG update: Publication of final Decarbonisation Readiness guidance and consultation response
BybonnixThe Environment Agency has published the final guidance on Decarbonisation Readiness (DR) in environmental permit applications, alongside our consultation response summarising stakeholder feedback received earlier this year. These publications mark an important milestone in preparing for the implementation of the new Decarbonisation Readiness requirements under the Environmental Permitting (England and Wales) Regulations 2016 (as amended…
4 Key Measurements For Optimal Boiler Control
The purpose of boiler control is to achieve safe operation, reliability and optimised performance with respect to load change response, fuel cost and emissions. In most control applications, repeatability or measurement is more important than absolute accuracy. Accuracy can be adjusted for software, but erratic readings cannot. Drum level is critical for safety and reliability….
